Hovering over each selectable component will display help in the lower left-hand corner. If the installer was not run as root, the sudo option in the upper right corner will do the installation using the sudocommand.
+
Hovering over each selectable component will display help in the lower left-hand corner. If the installer was not run as root, the <b>sudo</b> option in the upper right corner will do the installation using the sudocommand.
−
The Real-Time Host is the software that runs the real-time simulations on a RedHawk Linux system. Data logging may be done on the same system by also installing the Real-Time Data Logger, or it may be done on a different system connected to the real-time host through a dedicated network connection by installing the Real-Time Host and Real-Time Data Logger on separate systems.
+
The <span class="high">Real-Time Host</span> is the software that runs the real-time simulations on a RedHawk Linux system. Data logging may be done on the same system by also installing the <span class="high">Real-Time Data Logger</span>, or it may be done on a different system connected to the real-time host through a dedicated network connection by installing the <span class="high">Real-Time Host</span> and <span class="high">Real-Time Data Logger</span> on separate systems.
−
When a separate system is used for data logging, the architecture must match the real-time host. Both must be 32-bit or 64-bit architectures. It is possible to install the 32-bit data logger on a 64-bit system. When running the installer on a 64-bit RedHawk system, and Real-Time Host or Real-Time Data Logger is not already installed or selected, then the Real-Time Data Logger (32-bit) may be selected.
+
When a separate system is used for data logging, the architecture must match the real-time host. Both must be 32-bit or 64-bit architectures. It is possible to install the 32-bit data logger on a 64-bit system. When running the installer on a 64-bit RedHawk system, and <span class="high">Real-Time Host</span> or <span class="high">Real-Time Data Logger</span> is not already installed or selected, then the <span class="high">Real-Time Data Logger (32-bit)</span> may be selected.