Difference between revisions of "Release Highlights"
(→Release 2018.1-0 (03/23/2018)) |
(→Release 2018.1-0 (03/23/2018)) |
||
Line 2: | Line 2: | ||
===Summary by version === | ===Summary by version === | ||
This table provides quick access to what's new in each version. | This table provides quick access to what's new in each version. | ||
+ | ===Release 2018.2-0 (08/29/2018)=== | ||
+ | {|cellpadding="5" width="85%" | ||
+ | |'''<u>Module</u>''' | ||
+ | |width="85%" align="left" | '''<u>Enhancements</u>''' | ||
+ | |-bgcolor="#e0f0ff" | ||
+ | |valign="top"|Control Center | ||
+ | |valign="top"|<ul> | ||
+ | <li>Programs</li> | ||
+ | <ul> | ||
+ | <li>Added support for model exchange data for user models. New dialog on user model pane to define inputs/outputs used by a model.</li> | ||
+ | </ul> | ||
+ | </ul> | ||
+ | |-bgcolor="#f0f8ff" | ||
+ | |valign="top"|I/O Tasks | ||
+ | |valign="top"|<ul> | ||
+ | <li>NAI-79C3-E8</li> | ||
+ | <ul> | ||
+ | <li>Added support for the E7 module (Angular Encoder) of NAI-79C3 board.</li> | ||
+ | </ul> | ||
+ | <li>canasyncio</li> | ||
+ | <ul> | ||
+ | <li>Added sendorder in hardware record so CAN messages can be sent in a determined order.</li> | ||
+ | </ul> | ||
+ | <li>ddc 1553</li> | ||
+ | <ul> | ||
+ | <li>Added support for broadcast messages BC to RT and RT to RT. Broadcast messages are configured by specifying a destination RT of 31.</li> | ||
+ | <li>Added support for Bus Monitor for broadcast messages. Use RT 31 as destination when defining what message to monitor.</li> | ||
+ | </ul> | ||
+ | </ul> | ||
+ | |-bgcolor="#e0f0ff" | ||
+ | |valign="top"|MATLAB/Simulink | ||
+ | |valign="top"|<ul> | ||
+ | <li>MLToolkit </li> | ||
+ | <ul> | ||
+ | <li>Added following API calls:</li> | ||
+ | <ul> | ||
+ | <li> <i>simwb.rtobj.projectCreate</i> - Creates a project directory on the real-time host with specified name.</li> | ||
+ | <li> <i>simwb.rtobj.testSetModelInout</i> - Connects the output of one Simulink/user model to another Simulink/user model input.</li> | ||
+ | </ul> | ||
+ | </ul> | ||
+ | </ul> | ||
+ | |-bgcolor="#f0f8ff" | ||
+ | |valign="top"|SimWB API | ||
+ | |valign="top"|<ul> | ||
+ | <li>RTDB access API</li> | ||
+ | <ul> | ||
+ | <li>Added routine <i>ccurRTDB_mapModelCVT()</i> to map CVT struct at offset corresponding to RTDB when loading multiple RTDBs in a test.</li> | ||
+ | <li>Added routines <i>ccurRTDB_modelDataExchangeInit()</i> and <i>ccurRTDB_modelCopyInputs()</i> to support model data exchange and unit conversion for user models.</li> | ||
+ | <li>Added support for 32-bit API under 64-bit SimWB. This requires license 32BIT_API to run.</li> | ||
+ | <li>Added new API call <i>ccurAsyncIO_netIOSetDestPortIP()</i> to change destination IP and/or port for NETIO output messages.</li> | ||
+ | </ul> | ||
+ | </ul> | ||
+ | |-bgcolor="#e0f0ff" | ||
+ | |valign="top"|SimWB Core | ||
+ | |valign="top"|<ul> | ||
+ | <li>cfgsrv</li> | ||
+ | <ul> | ||
+ | <li>Added call to set modelvariables for user models.</li> | ||
+ | </ul> | ||
+ | </ul> | ||
+ | |-bgcolor="#f0f8ff" | ||
+ | |valign="top"|Ubuntu Specific | ||
+ | |valign="top"|<ul> | ||
+ | <li>x86_64</li> | ||
+ | <ul> | ||
+ | <li>Added support for SimWB for Ubuntu 16.04 x86_64 iHawk machines. Use the standard SimWB ISO for installation.</li> | ||
+ | </ul> | ||
+ | </ul> | ||
+ | |} | ||
+ | |||
===Release 2018.1-0 (03/23/2018)=== | ===Release 2018.1-0 (03/23/2018)=== | ||
{|cellpadding="5" width="85%" | {|cellpadding="5" width="85%" |
Revision as of 17:57, 29 August 2018
Contents
- 1 Summary by version
- 2 Release 2018.2-0 (08/29/2018)
- 3 Release 2018.1-0 (03/23/2018)
- 4 Release 2017.3-0 (08/17/2017)
- 5 Release 2017.1-0 (02/21/2017)
- 6 Release 7.9-0 (12/16/2016)
- 7 Release 7.7-0 (06/28/2016)
- 8 Release 7.6-0 (05/13/2016)
- 9 Release 7.5-1 (04/11/2016)
- 10 Release 7.5-0 (04/06/2016)
- 11 Release 7.4-0 (01/08/2016)
- 12 Release 7.3-0 (10/05/2015)
- 13 Release 7.2-0 (06/25/2015)
- 14 Release 7.1-0 (06/03/2015)
- 15 Release 7.0-0 (05/05/2015)
- 16 Release 6.10-1 (01/22/2015)
- 17 Release 6.10-0 (12/31/2014)
- 18 Release 6.9-1 (09/05/2014)
- 19 Release 6.9-0 (08/25/2014)
- 20 Release 6.7-4 (06/23/2014)
- 21 Release 6.7-3 (06/17/2014)
- 22 Release 6.7-2 (05/02/2014)
- 23 Release 6.7-1 (04/08/2014)
- 24 Release 6.7-0 (03/28/2014)
- 25 Release 6.5-1 (02/21/2014)
- 26 Release 6.5-0 (02/19/2014)
- 27 Release 6.4-0 (01/22/2014)
- 28 Release 6.3-0 (12/19/2013)
- 29 Release 6.2-2 (12/10/2013)
- 30 Release 6.1-0 (11/19/2013)
- 31 Release 6.0-1 (09/30/2013)
- 32 Release 6.0-0 (09/26/2013)
- 33 Release 5.5-5 (05/13/2013)
- 34 Release 5.5-0 (02/18/2013)
- 35 Release 5.1-0 (10/16/2012)
- 36 Release 5.0-3 (07/31/2012)
- 37 Release 5.0-2 (05/24/2012)
- 38 Release 5.0-1 (05/11/2012)
Summary by version
This table provides quick access to what's new in each version.
Release 2018.2-0 (08/29/2018)
Module | Enhancements |
Control Center |
|
I/O Tasks |
|
MATLAB/Simulink |
|
SimWB API |
|
SimWB Core |
|
Ubuntu Specific |
|
Release 2018.1-0 (03/23/2018)
Module | Enhancements |
FMU |
|
I/O Tasks |
|
MATLAB/Simulink |
|
Python API |
|
SimWB API |
|
SimWB Core |
|
Third Party Tools |
|
Release 2017.3-0 (08/17/2017)
Module | Enhancements |
Data logger |
|
I/O Tasks |
|
MATLAB/Simulink |
|
SimWB Core |
|
FPGA |
|
Python API |
|
SimWB API |
|
Utility Tool |
|
Release 2017.1-0 (02/21/2017)
Module | Enhancements |
CSharpAPI | |
SimWBCSharpAPI.dll |
|
I/O Tasks |
|
MATLAB/Simulink |
|
SimWB Core |
|
Release 7.9-0 (12/16/2016)
Module | Enhancements |
SimWB Core |
|
MATLAB/Simulink |
|
I/O Tasks |
|
Third Party Tools |
|
FPGA |
|
CSharpAPI |
|
Release 7.7-0 (06/28/2016)
Module | Enhancements |
FMU | |
AutoBuildScripts |
|
I/O Tasks |
|
SimWB Core |
|
Release 7.6-0 (05/13/2016)
Module | Enhancements |
CSharpAPI | |
SimWBCSharpAPI.dll |
|
FMU |
|
I/O Tasks |
|
MATLAB/Simulink |
|
Python API |
|
SimWB Core |
|
java/HMI |
|
Release 7.5-1 (04/11/2016)
Creating new sessions failed in tests involving SIMPACK models. Fixed. |
Column Major Flag was set incorrectly for Shared Parameters. Fixed |
Release 7.5-0 (04/06/2016)
Module | Enhancements |
CSharpAPI / SimWBCSharpAPI.dll |
|
I/O Tasks |
|
SimWB Core |
|
Java Installer / Installer |
|
MATLAB/Simulink |
|
Python API |
|
Release 7.4-0 (01/08/2016)
Module | Enhancements |
Control Center |
|
FMU |
|
I/O Tasks |
|
SimWB Core |
|
MATLAB/Simulink |
|
Release 7.3-0 (10/05/2015)
Module | Enhancements |
I/O Tasks |
|
MATLAB/Simulink |
|
PythonAPI |
|
SimWB API |
|
Release 7.2-0 (06/25/2015)
Module | Enhancements |
I/O Tasks |
|
Release 7.1-0 (06/03/2015)
Module | Enhancements |
SimWB API |
|
SimWB Core |
|
Test Scripting |
|
Release 7.0-0 (05/05/2015)
Module | Enhancements |
I/O tasks |
|
MATLAB/Simulink |
|
SimWB Core |
|
FMU |
|
Release 6.10-1 (01/22/2015)
Module | Enhancements |
I/O tasks |
|
MATLAB/Simulink |
|
SimWB Core |
|
Release 6.10-0 (12/31/2014)
Module | Enhancements |
Data Logger |
|
I/O tasks |
|
MATLAB/Simulink |
|
Python API |
|
SimWB Core |
|
Release 6.9-1 (09/05/2014)
Module | Enhancements |
Control Center |
|
I/O tasks |
|
Release 6.9-0 (08/25/2014)
Module | Enhancements |
Control Center |
|
I/O tasks |
|
MATLAB/Simulink |
|
Python ASAM support |
|
SimWB Core |
|
Release 6.7-4 (06/23/2014)
Module | Enhancements |
I/O tasks - dd42992 |
|
Release 6.7-3 (06/17/2014)
Module | Enhancements |
Control Center |
|
I/O tasks - Moxa fastcomm |
|
Python ASAM support |
|
SimWB Core |
|
Release 6.7-2 (05/02/2014)
Module | Enhancements |
MATLAB/Simulink |
|
SimWB Core |
|
Release 6.7-1 (04/08/2014)
Module | Enhancements |
I/O Tasks |
|
Release 6.7-0 (03/28/2014)
Module | Enhancements |
FMU |
|
I/O Tasks |
|
Python API |
|
SimWB Core |
|
Release 6.5-1 (02/21/2014)
Bug fixes to AIT AFDX I/O tasks. |
Fix for missing 64 bit ARINC429 I/O tasks. |
Release 6.5-0 (02/19/2014)
Module | Enhancements |
Data Logger |
|
I/O Tasks |
|
MATLAB/Simulink |
|
Python API |
|
Utility tool |
|
Release 6.4-0 (01/22/2014)
Module | Enhancements |
Control Center |
|
I/O Tasks |
|
SimWB Core |
|
Release 6.3-0 (12/19/2013)
Bug fixes to SimWB Control Center and I/O Tasks.
Release 6.2-2 (12/10/2013)
Module | Enhancements |
Control Center |
|
I/O Tasks |
|
Python API |
|
SimWB Core |
|
Release 6.1-0 (11/19/2013)
Module | Enhancements |
Control Center |
|
I/O Tasks |
|
Python API |
|
SimWB API |
|
SimWB Core |
|
Release 6.0-1 (09/30/2013)
Bug fixes to MLToolkit
Release 6.0-0 (09/26/2013)
Module | Enhancements |
Control Center |
|
Data Logger |
|
I/O Tasks |
|
MATLAB/Simulink |
|
Python API |
|
SimWB API |
|
SimWB Core |
|
Utility Tool |
|
Release 5.5-5 (05/13/2013)
Module | Enhancements |
Control Center |
|
I/O Tasks |
|
MATLAB/Simulink |
|
SimWB API |
|
SimWB Core |
|
Release 5.5-0 (02/18/2013)
Module | Enhancements |
Control Center |
|
Data Logger | dl2mat - Added support for the extraction of RTDB strings as arrays of unsigned byte values.. |
Release 5.1-0 (10/16/2012)
Module | Enhancements |
Control Center |
|
Data Logger | logsrv - Ability to run the logger in unbuffered mode when "Direct I/O" is unselected for the session. This is done via the /etc/ccursim.conf keyword "unbufferedio=N", where N is any non-zero value (the default is zero). |
I/O Tasks | logiwheel - New support for Logitech G27 steering wheel. |
SimWB Core | Add maximum initialization time in seconds as an additional parameter when creating the session. The default used by the scheduler is 45 seconds when specified as 0. The parameter is defined as maxinitime=xx in the test/session setup file. |
Release 5.0-3 (07/31/2012)
Module | Enhancements |
Control Center |
|
Data Logger | dl2mat- New smart naming heuristics available via -s option (see detailed command useage via -h option for details). Saved -M output can later be used as a tag file. |
I/O Tasks | pas2080 - Added a BIAS= option to pulse counting latch value reporting, wherein the latch value will be reported relative to the BIAS value. You may now have multiple COS definitions for the same channel (e.g. count pulses on the same channel but with two different latch windows). |
MATLAB/Simulink | New SimWB Custom Blocks Library. New DBC_CAN Block - a template block which can be customized based on an imported DBC file and user selected options.
SimWB preferences GUI to set-up RTDB creation and code generation options.
|
SimWB API | Move all internal initialization code that used to be in the main function in CScripttmpl.c to the library libccur_CScript.a so that the user can write their own main script.
Add API calls ccurSched_getSessionOverruns and ccurSched_getMaxOverruns to query the number of overruns occurend in the running session and the maximum # of overruns allowed. |
Release 5.0-2 (05/24/2012)
Module | Enhancements |
I/O Tasks | afdxasyncio - Add internal CAN hardware variables to monitor CAN message output schedule rate etc.
canasyncio - Add support to run under 64 bit. Add internal CAN hardware variables to monitor CAN message output schedule rate etc. Change schedule TX of CAN messages from board implementation/API to software timing as in afdxasyncio and arinc429asyncio. All corresponding API calls have been added to allow for control of TX rates/modes, etc.
New session start/stop/pause buttons in the global toolbar.
|
MATLAB/Simulink | Ignore FromWs block in Signal Builder Blocks during RTDB creation and check compliance.
Convert sample time of Inf to -1 for const blocks since SimWB does not under stand Inf.
|
SimWB API | Change schedule TX of CAN messages from board implementation/API to software timing as in afdxasyncio and arinc429asyncio. All corresponding API calls have been added to allow for control of TX rates/modes, etc. |
SimWB Core | Add service call gethardwarevars to get the list of internal variables from the selected RTDB. The hardwarerecord.db file is read and internal variable names are generated from it. |
Release 5.0-1 (05/11/2012)
Module | Enhancements |
Control Center | New navigation with global toolbar, global command tabs, and local toolbars.
New session start/stop/pause buttons in the global toolbar.
|
Data logger | Improved tag creation heuristics always result in a tag.
-X option added to specify extracted items on the command line.
|
I/O Tasks | PAS2080 initialization of pulse window latch now deferred one cycle for more accuracy.
Toothed wheel bias handling improved to avoid possible hang. |
MATLAB/Simulink | Enhanced support for nested model referenced models.
Support added for non-virtual buses in MATLAB R2010a and later.
|
SimWB Core | Support added for default value of array items.
New generic multirate scheduler added to SimWB. |